EV Chargers

EV charger installation across Tampa Bay

EV adoption in Tampa Bay has picked up fast in places like Wesley Chapel, Lutz, and FishHawk, where new construction and higher household incomes make a home charger an easy call. The problem is most garages weren't wired for anything beyond a 15-amp outlet and a shop light, so a Level 2 charger install almost always means new wiring back to the panel. We install chargers for every major brand and size the circuit correctly the first time.

(813) 850-0320 Request a quote

Level 2 EV charger mounted in a Tampa Bay garage with a clean conduit run

What's included in this service?

Run a dedicated 240-volt circuit sized for the charger, typically 40 to 60 amps
Install Tesla Wall Connectors, Ford Charge Station Pro, ChargePoint, and universal units
Check panel capacity and flag an upgrade up front if you need one
Pull the permit required for a new 240-volt circuit in Hillsborough and Pinellas County
Fish wire through plaster or brick in older South Tampa and St. Pete homes
Weatherproof and corrosion-resistant components for garages near the coast
Test the full charge cycle before we consider the job done

When do you need this service?

You're relying on public charging or a slow 120-volt trickle charge
You're building new or renovating a garage and want conduit stubbed in early
Your panel is already close to capacity with AC and other major appliances
You're adding a second EV and need real charging capacity
Your current 14-50 outlet was wired by someone other than a licensed electrician

What do homeowners ask about EV Chargers?

How much does EV charger installation cost in Tampa Bay?

A straightforward Level 2 install with an existing panel that has capacity runs $1,200 to $2,000 including the circuit, breaker, and permit. If your panel needs an upgrade first, expect to add $2,500 to $4,500 on top of that. We give you one combined quote so there's no surprise second invoice.

Can my current panel handle an EV charger?

It depends on your existing load and panel size. Homes with a 100A panel and central AC, an electric range, and other major appliances are often already close to capacity. We calculate your actual load during the walkthrough instead of guessing, and tell you honestly if an upgrade is needed.

Do you install chargers for Tesla and non-Tesla EVs?

Yes, we install Tesla Wall Connectors, Ford Charge Station Pro, ChargePoint, and universal NEMA 14-50 outlets that work with any EV using the standard J1772 or Tesla adapter. Tell us your vehicle and we'll recommend the right charger and circuit.

Is a permit required for EV charger installation in Florida?

Yes, most Hillsborough and Pinellas County jurisdictions require a permit for a new 240-volt circuit, even for a charger. We pull it as part of the job so the installation is documented and won't cause issues with insurance or a future home sale.

How long does the installation take?

A standard install with adequate panel capacity takes 3 to 5 hours. If we're also upgrading your panel or running a longer circuit through an older home's walls, plan for a full day. We'll give you a specific time estimate after seeing the garage and panel location.